Ford Flivver
   HOME

TheInfoList



OR:

The Ford Flivver is a single-seat aircraft introduced by
Henry Ford Henry Ford (July 30, 1863 – April 7, 1947) was an American industrialist, business magnate, founder of the Ford Motor Company, and chief developer of the assembly line technique of mass production. By creating the first automobile that mi ...
as the "Model T of the Air". After a fatal crash of a prototype into the ocean off
Melbourne, Florida Melbourne is a city in Brevard County, Florida, United States. It is located southeast of Orlando. As of th2020 Decennial Census there was a population of 84,678. The municipality is the second-largest in the county by both size and population. ...
, production plans were halted.


Development

The
Ford Trimotor The Ford Trimotor (also called the "Tri-Motor", and nicknamed the "Tin Goose") is an American three-engined transport aircraft. Production started in 1925 by the companies of Henry Ford and ended on June 7, 1933, after 199 had been made. It w ...
was Henry Ford's first successful commercial aircraft venture in 1925. Following the
Ford Model T The Ford Model T is an automobile that was produced by Ford Motor Company from October 1, 1908, to May 26, 1927. It is generally regarded as the first affordable automobile, which made car travel available to middle-class Americans. The relati ...
as an "everyman's" vehicle, the Ford Flivver was designed to be a mass-produced "everyman's" aircraft. The idea was first proposed to
William Bushnell Stout William Bushnell Stout (March 16, 1880 – March 20, 1956) was a pioneering American inventor, engineer, developer and designer whose works in the automotive and aviation fields were groundbreaking. Known by the nickname "Bill", Stout designed an ...
, manager of Ford's acquired aircraft division in 1926. Both Stout and
William Benson Mayo William Benson Mayo (7 January 1866 – 1 February 1944) was chief power engineer for the Ford Motor Company. Biography Mayo was born in Chatham, Massachusetts on 7 January 1866 to Andrew Stevens and Amanda Nickerson Mayo. He worked initially ...
, head of Ford's Aircraft Division wanted nothing to do with the aircraft and it was built in a nearby museum building in the Ford Laboratories. The single-seat aircraft was designed with Mr. Ford's instructions that it "fit in his office". The first example was displayed at the 1926
Ford National Reliability Air Tour The Ford Reliability Tour, properly called "The National Air Tour for the Edsel B. Ford Reliability Trophy", was a series of aerial tours sponsored in part by Ford from 1925 to 1931 and re-created in 2003. Top prize was the Edsel Ford Reliability ...
. The press and public flocked to see "Ford's Flying Car," a single-seat aircraft that had very little in common with the popular Model T "Flivver." Comedian
Will Rogers William Penn Adair Rogers (November 4, 1879 – August 15, 1935) was an American vaudeville performer, actor, and humorous social commentator. He was born as a citizen of the Cherokee Nation, in the Indian Territory (now part of Oklahoma ...
posed for press photos in the aircraft (although he never flew one). A ''New York Evening Sun'' columnist wrote the following poem showing excitement for the future flying Fords. :''I dreamed I was an angel'' :''And with the angels soared'' :''But I was simply touring'' : ''The heavens in a Ford.'' The name of the aircraft, "flivver", originated from a slang word in the early twentieth century designating an inexpensive car.


Design

The aircraft was a welded steel tube fuselage, with wood wing construction with fabric covering. The steerable rudder mounted tailwheel was also the only wheel with a brake. The exhaust was routed through a special manifold to a stock
Model T The Ford Model T is an automobile that was produced by Ford Motor Company from October 1, 1908, to May 26, 1927. It is generally regarded as the first affordable automobile, which made car travel available to middle-class Americans. The relati ...
exhaust. The steel landing gear was fastened to the wing and used rubber doughnuts in compression for shock absorption. The designer of the aircraft, Otto Koppen, went on to design the Helio Courier.


Operational history

Ford unveiled the Flivver on his 63rd birthday, July 30, 1926. Ford's chief test pilot was Harry J. Brooks, a young employee who had become a favorite of Ford. Brooks flew the Flivver regularly from his home garage to work at the Ford Laboratory, and later, used the second Flivver to move about the Ford properties. He once flew the aircraft in a race against
Gar Wood Garfield Arthur "Gar" Wood (December 4, 1880 – June 19, 1971) was an American inventor, entrepreneur, and championship motorboat builder and racer who held the world water speed record on several occasions. He was the first man to trave ...
in ''Miss America V'' on the Detroit River during the Harmsworth Trophy Races. In an attempt to draw on his popularity, Charles Lindbergh was invited to fly the Flivver on a visit to Ford field, August 11, 1927, and was the only other pilot to fly the Flivver prototypes. He later described the Flivver as "one of the worst aircraft he ever flew". A third prototype, tail number 3218, with "long" wings was built to win a long distance record for light planes in "C" class. The race was set from Ford Field in Dearborn Michigan to
Miami, Florida Miami ( ), officially the City of Miami, known as "the 305", "The Magic City", and "Gateway to the Americas", is a East Coast of the United States, coastal metropolis and the County seat, county seat of Miami-Dade County, Florida, Miami-Dade C ...
. A first attempt launched on 24 January 1928, witnessed by Henry Ford, landed short in
Asheville, North Carolina Asheville ( ) is a city in, and the county seat of, Buncombe County, North Carolina. Located at the confluence of the French Broad and Swannanoa rivers, it is the largest city in Western North Carolina, and the state's 11th-most populous cit ...
. A second attempt, flying the second prototype, witnessed by Edsel Ford, Brooks launched from Detroit on February 21, 1928 but landed short in
Titusville, Florida Titusville is a city in eastern Florida and the county seat of Brevard County, Florida, United States. The city's population was 43,761 as of the 2010 United States Census. Titusville is located along the Indian River, west of Merritt Island and ...
, where the propeller was bent, but still achieved a record. During his overnight stay at Titusville, Brooks had repaired the aircraft, using the propeller from the aircraft involved in the forced landing. He had also placed wooden toothpicks in the vent holes on his fuel cap to prevent moist air from entering and condensing overnight. On February 25, Brooks took off to complete the flight, circled out over the Atlantic where his motor quit and he went down off
Melbourne, Florida Melbourne is a city in Brevard County, Florida, United States. It is located southeast of Orlando. As of th2020 Decennial Census there was a population of 84,678. The municipality is the second-largest in the county by both size and population. ...
. The wreckage of the Ford Flivver washed up, but the pilot was never found. Investigation of the wreckage disclosed that the toothpicks had plugged the fuel cap vent holes, causing an engine stoppage. Following the death of Brooks, Henry Ford was distraught at the loss of his friend, and light aircraft development was stopped under the Ford brand. In 1931, a new "Air Flivver" or Sky Car was marketed by the Stout division of Ford. Ford went back into light plane development in 1936 with the two-seat Model 15-P. The prototype crashed during flight testing and did not go into production.


Variants

* Original Flivver 2A prototype: Designed around a wingspan, also built with full-span ailerons that could act as flaps, as well as shortened versions, powered by a three-cylinder Anzani; two built. * Flivver 2A (Flivver 3218) The third prototype was larger with a wingspan, had a fabric-covered steel frame, featured wing struts, a 50-gallon fuel tank, a dihedral increase, and a custom -Ford designed, horizontally opposed two-cylinder engine using Wright Whirlwind components that produced . The final three prototypes had this engine. Crash investigations were based on the pieces of this aircraft that washed ashore.


Aircraft on display

A surviving Flivver resides in the
Henry Ford Museum The Henry Ford (also known as the Henry Ford Museum of American Innovation and Greenfield Village, and as the Edison Institute) is a history museum complex in the Detroit suburb of Dearborn, Michigan, United States. The museum collection contains ...
. In 1991, EAA Chapter 159 from
Midland, Michigan Midland is a city in and the county seat of Midland County, Michigan. The city's population was 42,547 as of the 2020 census. It is the principal city of the Midland Micropolitan Statistical Area, part of the larger Saginaw-Midland-Bay City Comb ...
donated a replica to the
EAA AirVenture Museum The EAA Aviation Museum, formerly the EAA AirVenture Museum (or Air Adventure Museum), is a museum dedicated to the preservation and display of historic and experimental aircraft as well as antiques, classics, and warbirds. The museum is lo ...
. The replica was built in 1989 from careful inspection of the original prototype and advice from Otto C. Koppen, the original designer, although it was powered by a two-cylinder Franklin engine."Ford-EAA Flivver Chapter 159– 268."
''Air Venture Museum''. Retrieved: August 3, 2012.
A second replica is on display at the
Florida Air Museum The Florida Air Museum, formerly known as the International Sport Aviation Museum and the SUN 'n FUN Air Museum, is designated as Florida's "Official Aviation Museum and Education Center." It features a display of aircraft including one-of-a-kind ...
."Aircraft N3218, 1994 Florida Aviation Historical Society Ford Flivver, C/N: FAHS-2."
''airport-data.com.'' Retrieved: August 24, 2012.


Specifications (Ford Model 2A Flivver)


See also


References


Notes


Citations


Bibliography

* Corn, Joseph J. ''The Winged Gospel: America's Romance with Aviation.'' Baltimore, Maryland: The Johns Hopkins University Press, 2002. . * Davis, Michael W. R. and James K. Wagner. ''Ford Dynasty: A Photographic History.'' Mount Pleasant, South Carolina: Arcadia Publishing, 2002. . * Ford, Richardson Bryan. ''Beyond the Model T: The Other Ventures of Henry Ford'' (Great Lakes Books Publication). Detroit: Wayne State University Press, 1997. . * O'Callaghan, Timothy J. ''The Aviation Legacy of Henry & Edsel Ford'' (Michigan). Livonia, Michigan: First Page Publications, 2001. . * Pauley, Robert F. ''Michigan Aircraft Manufacturers'' (Images of Aviation). Mount Pleasant, South Carolina: Arcadia Publishing, 2009. .


External links


The Planes: 1926 Ford Flivver

Ford Flivver 3218 (1928)
{{Stout/Ford aircraft Ford aircraft 1920s United States civil utility aircraft Single-engined tractor aircraft Low-wing aircraft Aircraft first flown in 1927